توضیحات
بورد راه انداز ماژول NRF24L01 با خروجی سریال:
Function description:
1, detection of RF24L01 module is inserted: connect the power supply 3.3V and GND2 pins (supply voltage can not be more than 3.6V), 2 functions LED flashing, after the insertion of LED, RF24L01 put out the test module.
2, 2 rf24l01 communications module: use 2 sets of (RF24L01*2 + test board * 2) module, are respectively connected to the power, each module can detected rf24l01 exist, then press any key, also a module corresponding to the LED light. Similarly, the test other keys. This phenomenon shows that normal communication.
Note: This module does not provide source code and technical support, the original intention of this module is to allow you to test the speed of the fastest RF24L01 is normal. This module uses the STC Series MCU, the user can update the internal procedures.
Circuit diagram download address: http://pan.baidu.com/s/1i3lAMOl
Configuration list:
LY-RF24L01adp adapter 1 (already burning test procedures)
Need to buy 2 modules, and then buy or own 2 RF24L01 modules, plus 3.3V power supply equipment to the normal test.
Matching recommendations:
2 sets of TTL module + DuPont line (a number), it is recommended to buy the company’s RF24L01 module.
در این ماژول پروتکل سریالUART تنها از دو پین RX&TX میکرو استفاده می کند و نسبت به ارتباط SPI راه اندازی بسیار ساده تری دارد. به کمک این بورد راه انداز می توان پروتکل SPIماژول را به پروتکلUART تبدیل کرد که در خروجی تنها 4 پین تغذیه و ارتباط سریال قرار دارد. همچنین بر روی بورد نیزLED به منظور نشان دادن دیتا ورودی و خروجی درنظر گرفته شده است.
دیدگاهها
هیچ دیدگاهی برای این محصول نوشته نشده است.