توضیحات
ماژول افزاینده Power DC to DC Step Up 150W:
مدار الکتریکی ماژول تغذیه DC به DC جهت تبدیل سطح ولتاژ از یک منبع DC به طرف دیگر به صورت سوئیچینگ (رنج 75% تا 98%) و یا به صورت رگولاسیون خطی است. ماژول افزاینده Power DC to DC Step Up 150W یک مبدل است و که با ولتاژ ورودی در بازه 10 تا 32 ولت یک خروجی قابل تنظیم توسط یک مولتی ترن در بازه 12 تا 35 ولت تولید می کند. توان خروجی آن در حالت عادی 100 وات و در صورتی که از فن خنک کننده استفاده شود تا حداکثر 150 وات می رسد.همچنین قابلیتی در این ماژول نمی باشد که جریان را تقویت و بیشتر کند.
مشخصات:
توان خروجی: 150وات max
ولتاژ ورودی: 10 تا 32 ولت
ولتاژ خروجی: 12 تا 35 ولت
جریان خروجی ماکزیمم: 6 آمپر
جریان ورودی ماکزیمم : 10 آمپر
نوع مبدل: مبدل BOOST افزاینده
جریان بدون بار: 25ma
کاربردها
تبدیل 12 ولت به 24 ولت
شارژرها
و منابع تغذیه
و….
Feature:
Module Properties: non-isolated step-up module (BOOST)
65 * 56.5 * 23 (length * width * high) (mm)
Input voltage: 10-32V
Output voltage: 12-35V (adjustable)
Output Current: 6A (MAX)
Input Current: 10A (MAX) (Please improve heat dissipation if more than 10A)
Output power: natural cooling 100W (MAX), improve heat dissipation 150W (MAX)
Easy to drive 65W 90W dual core notebook.
Use a 12V battery drive 19V 3.42A notebook, the module temperature about 45°c
Conversion Efficiency: 94% (measured at Input 16V, Output 19V 2.5A)
Output Ripple: 2% (MAX) 20M Bandwidth
Operating temperature: Industrial (-40°c to +85°c) (ambient temperature exceeds 40°c, lower power consumption, or to improve heat dissipation)
Full load temperature rise: 45°c
No-load current: 25mA typical
Voltage regulation: ±0.5%
Dynamic response rate: 5% 200uS
Short circuit protection: None (Install fuses and protection circuits on input.)
Input Reverse Polarity Protection: None (Please Series diode at the input.)
دیدگاهها
هیچ دیدگاهی برای این محصول نوشته نشده است.